Customized high speed dispensing machine, glue machine!

新京葡平台  

Dongguan CNAUTO Automation Co., LTD.

18929475867

28

2019-04

writer:点胶机厂家 Click:267

Next, the difference of needle type used in dispensing machine will be introduced. This is a necessary operation to enhance the accuracy and quality of dispensing point when various sealed dispensing machines are used. By establishing the characteristics .

20

2019-04

writer:点胶机厂家 Click:249

This brief introduction on how to adjust the needle of dispensing machine will involve the difference of needle type and specifications. There may be many repetitive effects of dispensing glue in different industries. Only by establishing the way and oper.

19

2019-04

writer:点胶机厂家 Click:251

The concept of seamless underwear has appeared for a long time. From the present point of view, the demand of seamless underwear lies in the two points of health and comfort. Rational use of dispensing technology is an important operation process. It shou.

16

2019-04

writer:点胶机厂家 Click:183

The main function of sealing glue for small electronic products is sealing protection, and at the same time, it greatly improves the function of protecting dust and moisture. The main purpose is to use sealing glue for small products such as battery cover.

16

2019-04

writer:点胶机厂家 Click:325

Adhesive sealant should be applied in battery cover coating or semiconductor coating. Of course, in order to ensure the quality of adhesives, operators need to know the difference and selection between sealant and glass glue. The particularities of the tw.

13

2019-04

writer:点胶机厂家 Click:275

Electronics chip coating method of semiconductor material has gradually changed from manual to automatic equipment. It is recommended that visual dispensing machine be used in semiconductor coating with high degree of completion and good quality. So CCD v.

12

2019-04

writer:点胶机厂家 Click:261

Small-sized batteries cover coating can be accomplished by desktop dispensing machine. In fact, the application effect of visual dispensing machine in batch production has more superior effect. CCD visual dispensing machine can be used in batch production.

11

2019-04

writer:点胶机厂家 Click:284

High or low viscosity adhesives are often used in product dispensing. According to the need of bonding strength, they tend to be the former. This paper briefly describes the adjustment and mode of controlling the viscosity of glue in industry production. .

11

2019-04

writer:点胶机厂家 Click:284

There is a requirement for consistency in the gluing process of bottle cap in batch production line type. Some special bottle cap gluing uses white latex instead of hot melt glue which is only used for building gluing. Therefore, it is better to control t.

09

2019-04

writer:点胶机厂家 Click:238

White latex is made from emulsion polymerization of water dispersive medium. It can be coated with white latex, such as carton bonding, sticky board, wood furniture and furniture assembly. When used, it includes viscosity control method, the need to use s.

08

2019-04

writer:点胶机厂家 Click:231

Operators can apply white latex on the links of wood-bonded boards to reinforce the strength further. Manual work can be done by hand or by special automatic white latex dispenser. The white latex can be coated on the surface of wood-bonded boards by oper.

04

2019-04

writer:点胶机厂家 Click:223

Whether controlling special glue or controlling adhesives such as high temperature and low temperature resistant glue, the fluidity and applicability should be guaranteed. The speed of glue stored in piston dispensing syringe has a great influence on effi.

02

2019-04

writer:点胶机厂家 Click:181

The screen sealing of mobile phone can be carried out with special type sealant, of course, epoxy glue can also be applied to finish the sealing work. Because the sealing accuracy and stability control of mobile phone screen after gluing need to ensure hi.

31

2019-03

writer:点胶机厂家 Click:277

Ordinary screen seals of mobile phones protect against impact and waterproof by manual operation. In fact, they can be quantitatively controlled by automation equipment with higher efficiency and quality. A large number of mobile phone screens need to be .

25

2019-03

writer:点胶机厂家 Click:306

4331 dispensing machine is one of the duplex equipment, which can be used for precision dispensing, gluing and packaging of batch products. It has the unique advantages of high efficiency, stability and strong. After programming with the control board, it.

23

2019-03

writer:点胶机厂家 Click:166

Glue is the medium used for bonding products. The control method of glue strength is usually through temperature adjustment. Pressure barrel with heating device is also suitable for storage and glue control. It is partly affected by the nature of glue pro.

22

2019-03

writer:点胶机厂家 Click:292

Capacitor cover bonding should be glued with glue for encapsulation. The characteristics of double position of 4331 dispenser are suitable for strengthening capacitor cover by gluing. This equipment can be used for batch precision gluing. The stability of.

19

2019-03

writer:点胶机厂家 Click:186

331 dispensing machine has become an important equipment in modern automation production line. It can assemble many control parts including 2121 dispensing valves to complete dispensing, packaging and dispensing of various products. One of the problems in.



中制自动化设备有限企业全力为用户打造各种实用性强的高速全自动点胶机 大型高速点胶机 落地式高速点胶机

XML 地图 | Sitemap 地图