Customized high speed dispensing machine, glue machine!

新京葡平台  

Dongguan CNAUTO Automation Co., LTD.

18929475867

09

2019-09

writer:点胶机厂家 Click:239

AB glue dispensing machine is a two-component dispensing equipment, which is quite different from our usual dispensing equipment. If abnormal use of AB glue affects its effectiveness, how can it be used for glue control? The following answers will be give.

07

2019-09

writer:点胶机厂家 Click:215

The present situation and development prospects of domestic glue filling machines: At present, the development of domestic glue-filling machine industry is relatively mature in single-component glue-filling technology. Its development direction is automat.

07

2019-09

writer:点胶机厂家 Click:313

With the development of modern production and science and technology, higher and higher requirements have been put forward for automation technology, which also provides necessary conditions for the development and innovation of automatic dispensing equip.

06

2019-09

writer:点胶机厂家 Click:144

When choosing a glue-coating robot, we should first know the glue-coating characteristics, whether it needs heating, whether it needs flow control and viscosity adjustment, and determine the characteristics of the workpiece to be coated, how many motion m.

05

2019-09

writer:点胶机厂家 Click:196

In the foregoing, we briefly introduced the functional differences of some common dispensing equipment in the market. In fact, the functional differences of dispensing equipment are largely determined by the differences in the design of dispensing equipme.

04

2019-09

writer:点胶机厂家 Click:223

Modern smartphones have entered the era of large screen. Unlike key-press telephones in the past, most telephones still use glue to fix their components, such as smart chips, motherboards, etc. ) Then someone asked, what on earth needs to be glued to the .

04

2019-09

writer:点胶机厂家 Click:190

I believe everyone should know that dispenser is a widely used precision instrument, which is mainly used to precisely point, inject, coat and drop glue, paint and other liquids to the precise position of each product in our common product process. These .

03

2019-09

writer:点胶机厂家 Click:146

From 2002 to the end of 2012, the annual sales of dispensing machine packaging industry has been growing at a high speed. Despite a slight decline in the dispensing machine market during this period, however, driven by the huge market demand and the conti.

02

2019-09

writer:点胶机厂家 Click:181

The most fundamental reason why dispensing machine can not keep glue is that the seals are not leaking, and the suction of the leak valve does not play any role, which will lead to bad glue recovery and leakage. Glue will be the problem mentioned above. 3.

02

2019-09

writer:点胶机厂家 Click:143

The dispensing machine is mainly used to inject precise points of glue, paint and other liquids into the position of each product in the process of product processing. What are the causes of occasional bad products in use? Dual-position coating dispenser .

31

2019-08

writer:点胶机厂家 Click:195

The mixing pipe under the valve is a common dispensing material. The mixing pipe has dynamic and static types. The spiral stirring core in the mixing tube deforms the glue for a long time and forms burrs. The dispensing consumables of this consumption lev.

29

2019-08

writer:点胶机厂家 Click:292

The quality of solder paste is not up to standard The quality of the compound directly determines the quality of the product in the point solder paste problem. General products can be packaged with general solder paste, but the use of liquid crystal film .

28

2019-08

writer:点胶机厂家 Click:286

Today, the LED packaging market has a good prospect. Domestic LED giants further expand their production capacity and purchase supporting equipment. The most commonly used LED packaging equipment in the market include: crystal fixer, wire welder, dispensi.

27

2019-08

writer:点胶机厂家 Click:309

The same equipment has the same effect in different manufacturing. From the beginning of use in some customer factories, there is almost no after-sales service for the same equipment. Some factories need after-sales service every other day. The main reaso.

27

2019-08

writer:点胶机厂家 Click:243

In the process of purchasing automatic dispensing machine, it is necessary to compare the price of automatic dispensing machine objectively so as to better realize the purchasing of more meaningful dispensing machine. In recent years, with the continuous .

26

2019-08

writer:点胶机厂家 Click:181

With the continuous development of domestic manufacturing industry and the development of market competition, more and more packaging manufacturers realize that only excellent technical support, efficient output efficiency and cost-effective can occupy a .

23

2019-08

writer:点胶机厂家 Click:253

In many consumer technologies, dispensing and packaging often need to be stopped for a product process. After years of application, it is difficult for SMEs to cope with the application of flow control. The emergence of automatic high-speed dispensing mac.

22

2019-08

writer:点胶机厂家 Click:199

The factors affecting the packaging cost of dispensing machine and filling machine depend on the packaging process and the skill level of the controllers, except for the machine setting itself. In order to further reduce packaging costs, first of all, the.



中制自动化设备有限企业全力为用户打造各种实用性强的高速全自动点胶机 大型高速点胶机 落地式高速点胶机

XML 地图 | Sitemap 地图